FS-Reflexion
Seismic detector
|
|
|
The following technical indications are medial values.
During operation small variations are quite possible.
Control unit with seismic vibration transducer
| Dimensions (W x D x H) |
|
22 x 30 x 22 cm |
| Operating Temperature |
|
0 °C – 45 °C |
| Storage Temperature |
|
-20 °C – 60 °C |
| Power consumption (typical) |
|
approx. 12 W |
| Effective range |
|
4 – 22 Hz (via vibration transducer) |
| Processor |
|
AMD LX800, 500 MHz |
| Memory |
|
256 MB RAM, 128 MB data |
| Vibration transducer |
|
seismic, piezo system |
Transmitter
| Voltage |
|
12 VDC, internal batteries |
| Output power (maximal) |
|
150 W |
| Operating Temperature |
|
0 °C – 45 °C |
| Frequency (internal control) |
|
4 – 22 Hz |
Data transmission (USB)
| Maximum Transfer Rate |
|
19200 Baud |
Data transmission (Bluetooth)
| Frequency |
|
2.4 – 2.4835 GHz |
| Maximum Transfer Rate |
|
1 Mbps |
| Receiving Sensitivity |
|
-85 dBm |
| Maximum Range |
|
approx. 100 m |
Computer, minimum requirements
The computer is not part of the scope of delivery.
The indicated values should help you for a correct selection of a suitable computer
for analysis of your measured results.
| Interface (Data transmission) |
|
USB |
| Free disk space |
|
minimum 50 MB |
| Working memory (RAM) |
|
minimum 256 MB |
| Graphic card |
|
minimum 128 MB, OpenGL-compatible |
| Processor |
|
minimum 1.2 GHz |
| Operating system |
|
Windows Vista, XP, 98SE, 2000 |
|
|
